How to Remove a Screw that Is Screwed in too Far in Your Wind Guard Hardware
If you find that a screw in your wind guard hardware is screwed in too far and you’re unable to back it out, follow these steps to resolve the issue:
Find a Thin Object: Locate a thin, sturdy object such as a knife, putty knife, or a similar tool.
Apply Pressure: Slide the thin object between the tip of the screw and the back surface of the wind guard hardware. Apply gentle pressure to push the screw outward. This helps the screw catch the threads so it can be unscrewed.
Use a Screwdriver: While applying pressure behind the screw, use a screwdriver to turn the screw counterclockwise and back it out.
For a visual demonstration, please watch the video below.
If you encounter any further issues or need additional assistance, please contact our customer support team for help.
Gathering ‘round your fire pit on a crisp fall evening is one of those simple joys in life. Unless it’s a windy night. Those gusty breezes can quickly turn your peaceful flame-viewing experience upside-down by whipping the flames out of control.…
Typically, cleaning the flame guard for your fire pit or fire table will be easier than cleaning glass doors on a fireplace. Often, you will already have cleaning materials on hand. As is the case with many things, frequency is…
Picture it: You’re spending time with beloved friends or family, gathered around your fire pit on a balmy summer evening. The flames are high and bright — in fact, everyone keeps remarking how beautifully the light of the fire reflects…
